AE Coaxial systems

Best sound around – with the new coaxial systems AXTON stays in pole position. Built for the toughest road conditions, these speakers can take anything. They stand out with solid design, offer superb performance, are ideal to install, and all this at undeniably attractive prices.
The unbeatably good sounding systems are available in all current Euro-DIN basket sizes.

  • AE Evolution Series (AE652F – AE402F): very easy on the budget
AE Coaxial Systems
AE652F16.5 cm /6.5

AE652F
16.5 cm /6.5″ Coaxial System
(Evolution Series)

  • Durable construction
  • Solid detail solutions
Extending the AXTON line-up with a range of five coaxials models and a triaxial, this aggressively priced speaker series lends itself to replace older or defective speakers in many cars at low cost. Although very easy on the budget, these models still follow the AXTON tradition and convince in terms of workmanship as well as sound quality.
All 2-way coaxials deploy stable Euro-DIN baskets and fit – not least because of the compact strontium-ferrite magnet motors – into the original factory speaker openings of most vehicles. The mid/woofers feature lightweight low-resonance injection molded polypropylene cones, offering high stiffness and good internal damping, for accurate reproduction throughout the entire frequency range. Additionally, foam surrounds provide improved transient response by low mass and low inertia.
AXTON‘s coaxials also benefit from the shallow 13 mm Mylar dome tweeter assembly, which guarantees sparkling highs and a sophisticated high-frequency reproduction.
  • stamped steel basket, compact basket construction in Euro-DIN format (2-way models)
  • strontium-ferrite mid/woofer magnet
  • lightweight low-resonance injection moulded Polypropylen cone, offering high stiffness and good internal damping
  • Polyurethan foam surround
  • shallow 13 mm Mylar dome Neodymium tweeter, offering sparkling highs and a sophisticated high-frequency reproduction
  • speaker grilles contained in the delivery
 AE652F
Nominal power handling
110 W
Sensitivity (1 W/1 m) 91 dB
Frequency response 60 Hz – 25 kHz
Nominal impedance 4 ohms
Mounting diameter143 mm
Mounting depth 60 mm
AE572F 13 x 18 cm /5 x 7

AE572F
13 x 18 cm /5 x 7″Coaxial System
(Evolution Series)

  • Durable construction
  • Solid detail solutions
Extending the AXTON line-up with a range of five coaxials models and a triaxial, this aggressively priced speaker series lends itself to replace older or defective speakers in many cars at low cost. Although very easy on the budget, these models still follow the AXTON tradition and convince in terms of workmanship as well as sound quality.
All 2-way coaxials deploy stable Euro-DIN baskets and fit – not least because of the compact strontium-ferrite magnet motors – into the original factory speaker openings of most vehicles. The mid/woofers feature lightweight low-resonance injection molded polypropylene cones, offering high stiffness and good internal damping, for accurate reproduction throughout the entire frequency range. Additionally, foam surrounds provide improved transient response by low mass and low inertia.
AXTON‘s coaxials also benefit from the shallow 13 mm Mylar dome tweeter assembly, which guarantees sparkling highs and a sophisticated high-frequency reproduction.
  • stamped steel basket, compact basket construction in Euro-DIN format (2-way models)
  • strontium-ferrite mid/woofer magnet
  • lightweight low-resonance injection moulded Polypropylen cone, offering high stiffness and good internal damping
  • Polyurethan foam surround
  • shallow 13 mm Mylar dome Neodymium tweeter, offering sparkling highs and a sophisticated high-frequency reproduction
  • speaker grilles contained in the delivery
 AE572F
Nominal power handling110 W
Sensitivity (1 W/1 m) 89 dB
Frequency response 60 Hz – 25 kHz
Nominal impedance 4 ohms
Mounting diameter13 x 18 cm/5 x 7"
Mounting depth 60 mm
AE462F 10 x 15 cm/4 x 6

AE462F
10 x 15 cm/4 x 6″Coaxial System
(Evolution Series)

  • Durable construction
  • Solid detail solutions
Extending the AXTON line-up with a range of five coaxials models and a triaxial, this aggressively priced speaker series lends itself to replace older or defective speakers in many cars at low cost. Although very easy on the budget, these models still follow the AXTON tradition and convince in terms of workmanship as well as sound quality.
All 2-way coaxials deploy stable Euro-DIN baskets and fit – not least because of the compact strontium-ferrite magnet motors – into the original factory speaker openings of most vehicles. The mid/woofers feature lightweight low-resonance injection molded polypropylene cones, offering high stiffness and good internal damping, for accurate reproduction throughout the entire frequency range. Additionally, foam surrounds provide improved transient response by low mass and low inertia.
AXTON‘s coaxials also benefit from the shallow 13 mm Mylar dome tweeter assembly, which guarantees sparkling highs and a sophisticated high-frequency reproduction.
  • stamped steel basket, compact basket construction in Euro-DIN format (2-way models)
  • strontium-ferrite mid/woofer magnet
  • lightweight low-resonance injection moulded Polypropylen cone, offering high stiffness and good internal damping
  • Polyurethan foam surround
  • shallow 13 mm Mylar dome Neodymium tweeter, offering sparkling highs and a sophisticated high-frequency reproduction
  • speaker grilles contained in the delivery
 AE462F
Nominal power handling110 W
Sensitivity (1 W/1 m) 88 dB
Frequency response 60 Hz – 25 kHz
Nominal impedance 4 ohms
Mounting diameter 10 x 15 cm/4 x 6"
Mounting depth 48 mm
AE502F 13 cm /5,25

AE502F
13 cm /5.25″ Coaxial System
(Evolution Series)

  • Durable construction
  • Solid detail solutions
Extending the AXTON line-up with a range of five coaxials models and a triaxial, this aggressively priced speaker series lends itself to replace older or defective speakers in many cars at low cost. Although very easy on the budget, these models still follow the AXTON tradition and convince in terms of workmanship as well as sound quality.
All 2-way coaxials deploy stable Euro-DIN baskets and fit – not least because of the compact strontium-ferrite magnet motors – into the original factory speaker openings of most vehicles. The mid/woofers feature lightweight low-resonance injection molded polypropylene cones, offering high stiffness and good internal damping, for accurate reproduction throughout the entire frequency range. Additionally, foam surrounds provide improved transient response by low mass and low inertia.
AXTON‘s coaxials also benefit from the shallow 13 mm Mylar dome tweeter assembly, which guarantees sparkling highs and a sophisticated high-frequency reproduction.
  • stamped steel basket, compact basket construction in Euro-DIN format (2-way models)
  • strontium-ferrite mid/woofer magnet
  • lightweight low-resonance injection moulded Polypropylen cone, offering high stiffness and good internal damping
  • Polyurethan foam surround
  • shallow 13 mm Mylar dome Neodymium tweeter, offering sparkling highs and a sophisticated high-frequency reproduction
  • speaker grilles contained in the delivery
 AE502F
Nominal power handling100 W
Sensitivity (1 W/1 m) 89 dB
Frequency response 60 Hz – 25 kHz
Nominal impedance 4 ohms
Mounting diameter 119 mm
Mounting depth 48 mm
AE402F 10 cm /4

AE402F
10 cm /4″ Coaxial System
(Evolution Series)

  • Durable construction
  • Solid detail solutions
Extending the AXTON line-up with a range of five coaxials models and a triaxial, this aggressively priced speaker series lends itself to replace older or defective speakers in many cars at low cost. Although very easy on the budget, these models still follow the AXTON tradition and convince in terms of workmanship as well as sound quality.
All 2-way coaxials deploy stable Euro-DIN baskets and fit – not least because of the compact strontium-ferrite magnet motors – into the original factory speaker openings of most vehicles. The mid/woofers feature lightweight low-resonance injection molded polypropylene cones, offering high stiffness and good internal damping, for accurate reproduction throughout the entire frequency range. Additionally, foam surrounds provide improved transient response by low mass and low inertia.
AXTON‘s coaxials also benefit from the shallow 13 mm Mylar dome tweeter assembly, which guarantees sparkling highs and a sophisticated high-frequency reproduction.
  • stamped steel basket, compact basket construction in Euro-DIN format (2-way models)
  • strontium-ferrite mid/woofer magnet
  • lightweight low-resonance injection moulded Polypropylen cone, offering high stiffness and good internal damping
  • Polyurethan foam surround
  • shallow 13 mm Mylar dome Neodymium tweeter, offering sparkling highs and a sophisticated high-frequency reproduction
  • speaker grilles contained in the delivery
 AE402F
Nominal power handling80 W
Sensitivity (1 W/1 m) 87 dB
Frequency response 60 Hz – 25 kHz
Nominal impedance 4 ohms
Mounting diameter 93 mm
Mounting depth 41 mm