Triaxial Systems

If you are looking for sturdy, powerful rear speakers, then you will not want to miss out on these AXTON triaxials. With the 6 x 9″/15 x 23 cm ATX369, ATF369 and AE693F AXTON has three very tough 3-way systems in its range that also boast a high efficiency and high sound playback level thanks to the large cone area.

Triaxial Systems
ATX369 15 x 23 cm /6 x 9

ATX369
15 x 23 cm/6 x 9″ Triaxial System

  • With 13 mm black Mylar dome neo tweeter and 51 mm black Mylar cone midrange speaker
  • Hard gold plated connectors guarantee trouble-free long-life operation without the sound suffering from signal losses
AXTON‘s new coaxials and triaxial are constructed as point sound sources. The 13 mm dome is at the same level as the woofer cone thereby enabling in-phase radiation of the overlapping frequency sections. Phase shifts in the transition between the frequency components that arise with conventionally protruding tweeters are therefore a thing of the past. The result is transparent, clear music reproduction with a very dynamic response.
  • 15 X 23 CM 3-WAY TRIAXIAL SPEAKER SYSTEM
  • 13 MM BLACK MYLAR DOME NEO TWEETER
  • 51 MM BLACK MYLAR CONE MIDRANGE SPEAKER
  • STRONTIUM-FERRITE MAGNET MID/WOOFER
  • INJECTION MOULDED POLYPROPYLENE CONE
  • NBR NITRILE RUBBER SURROUND
  • NOMEX SPIDER
  • KAPTON VOICE-COIL FORMER
  • 4-LAYER CCA-WIRE VOICE-COIL
  • GOLD PLATED FAST-ON CONNECTORS
 ATX369
Frequency response45 Hz – 22 kHz
Nominal impedance
4 ohms
Sensitivity 1 W/1 m93 dB
Nominal power handling100 Wrms
Mounting diameter15 x 23 mm
Mounting depth69 mm
ATF369 15 x 23 cm /6 x 9

ATF369
15 x 23 cm/6 x 9″ Triaxial System

  • Tweeter with 13 mm soft dome, ferrofluid cooled with neodymium magnet
  • Hard gold plated connectors guarantee trouble-free long-life operation without the sound suffering from signal losses
With the ATF369 triaxial system, AXTON introduces a speaker that allows to retrofit and/or upgrade any vehicle in truly uncomplicated manner, for a transparent sound – even in combination with the original factory radio.
Ease of installation thanks to the compact design, musicality and precision coupled with durability and high efficiency – these are attributes for which AXTON speaker systems are known for two decades, where the new triaxial causes no exception of the rule.
The ATF369 features a ferrite magnet of moderate dimensions to provide for a rich, powerful bass reproduction but still complies with mounting depth requirements of most vehicles.
AXTON’s triaxial deploys a steel basket painted in anthracite grey, a PP cone with high damping and an NBR nitrile surround for a long service life. The Nomex spider and large voice coil, wound on polyimide former, ensure high mechanical and electrical resilience and power handling.
The ATF369 features a newly designed 13 mm soft dome tweeter that excels with a linear frequency response way beyond 20 kHz and a very low distortion level even at high SPL due to the use of a strong neodymium magnet. The fine sound reproduction of the ATF369 is obtained by the 3-way construction with a 51 mm Mylar dome tweeter.
Gold plated terminals ensure trouble-free long-term operation without signal loss and underline the high quality of the AXTON coaxial systems.
  • mid/woofer with steelbasket in oval format
  • strontium ferrite magnet
  • resonance optimized polypropylene cone
  • surround made of nitrile rubber (NBR)
  • 25 mm voice coil wound with copper wire
  • tweeter with 13 mm soft dome, ferrofluid cooled with neodymium magnet
  • 51 mm midrange with mylar dome
  • gold plated terminals
 ATF369
Peak Input Power 300 W
Continuous Input Power (RMS)
200 W
Sensitivity (1 W/1 m) 92 dB
Frequency Response (-3 dB) 50 Hz – 25 kHz
Nominal Impedance 4 ohms
Cutout Diameter 15 x 23 cm/6 x 9"
Mounting Depth 80 mm
AE693F 15 x 23 cm /6 x 9

AE693F
15 x 23 cm /6 x 9″
Triaxial System (Evolution Series)

  • Durable construction
  • Solid detail solutions
Extending the AXTON line-up with a range of five coaxials models and a triaxial, this aggressively priced speaker series lends itself to replace older or defective speakers in many cars at low cost. Although very easy on the budget, these models still follow the AXTON tradition and convince in terms of workmanship as well as sound quality.
AXTON‘s triaxial also benefit from the shallow 13 mm Mylar dome tweeter assembly, which guarantees sparkling highs and a sophisticated high-frequency reproduction.
  • stamped steel basket, compact basket construction in Euro-DIN format (2-way models)
  • strontium-ferrite mid/woofer magnet
  • lightweight low-resonance injection moulded Polypropylen cone, offering high stiffness and good internal damping
  • Polyurethan foam surround
  • shallow 13 mm Mylar dome Neodymium tweeter, offering sparkling highs and a sophisticated high-frequency reproduction
  • 51 mm midrange with Mylar cone
  • speaker grilles contained in the delivery
 AE693F
Nominal power handling200 W
Sensitivity (1 W/1 m) 93 dB
Frequency response 50 Hz – 25 kHz
Nominal impedance 4 ohms
Mounting diameter 15 x 23 cm/6 x 9"
Mounting depth 74 mm