ATC Component Systems

With its high performance component systems, AXTON once again demonstrates how the future ought to be: soundwise and technically, but also with regard to ease of installation – for the new speakers are so compact that they can be mounted without hassle in almost any OEM slot.
These unbeatably good sounding systems are available in three variants:

  • ATC-DUC: Vehicle-specific compo system for FIAT Ducato
  • ATC series: ATC series: equipped with powerful ferrite magnets, powerful bass fundament, yet moderate installation depths
  • ATC-N series: equipped with powerful, ultra flat neodymium magnets, especially suited for tightly dimensioned cutouts
ATC Component Systems
ATC200 20 cm /8

ATC200
20 cm/8″ 2-way component speaker system

  • Powerful Strontium-Ferrite magnet motor
  • 25 mm silk-dome tweeter
  • 0/-3dB tweeter attenuation
  • mounting adaptors included
  • grilles included
The ATC series can replace factory mounted components without any problem. There is no need to fit a common crossover as the woofer can be exchanged directly 1 to 1. A compact tweeter cross- over is included that can easily be placed behind the trim.

The newly developed AXTON 25 mm woven tweeter of the compos make long listening sessions a pleasure even at high volumes. With its faithful reproduction the tweeter also scores with moderate instal- lation requirements due to the small housing dimensions. The special diffuser ensures a broad radiation pattern thereby considerably increasing the sound staging. For mounting well away from the original installation position AXTON has designed a sleek enclosure providing for various positioning and alignment angles with the aid of two mounting brackets.

MID/WOOFER

  • 20 CM EURO-DIN BASKET
  • STRONTIUM-FERRITE MAGNET
  • INJECTION MOULDED POLYPROPYLENE CONE
  • NBR NITRILE RUBBER SURROUND
  • NOMEX SPIDER
  • KAPTON VOICE-COIL FORMER
  • GOLD PLATED FAST-ON CONNECTORS

TWEETER

  • 25 MM BLACK SILK DOME NEO TWEETER
  • POLYIMIDE VOICE COIL FORMER
  • FERROFLUID COOLED VOICE-COIL
  • MOUNTING ADAPTORS INCLUDED

CROSSOVER

  • 6 DB/OCT IN-LINE CROSSOVER NETWORK
  • SPACE-SAVING CROSSOVER HOUSING
  • 0DB/-3DB TWEETER ATTENUATION
 ATC200
Frequency response50 Hz – 25 kHz
Nominal impedance
4 ohms
Sensitivity 1 W/1 m94 dB
Nominal power handling100 Wrms
Mounting diameter184 mm
Mounting depth72 mm
ATC165 16,5 cm /6,5

ATC165
16,5 cm/6,5″ 2-way component speaker system

  • Powerful Strontium-Ferrite magnet motor
  • 25 mm silk-dome tweeter
  • 0/-3dB tweeter attenuation
  • mounting adaptors included
  • grilles included
The ATC series can replace factory mounted components without any problem. There is no need to fit a common crossover as the woofer can be exchanged directly 1 to 1. A compact tweeter cross- over is included that can easily be placed behind the trim.

The newly developed AXTON 25 mm woven tweeter of the compos make long listening sessions a pleasure even at high volumes. With its faithful reproduction the tweeter also scores with moderate instal- lation requirements due to the small housing dimensions. The special diffuser ensures a broad radiation pattern thereby considerably increasing the sound staging. For mounting well away from the original installation position AXTON has designed a sleek enclosure providing for various positioning and alignment angles with the aid of two mounting brackets.

MID/WOOFER

  • 16.5 CM EURO-DIN BASKET
  • STRONTIUM-FERRITE MAGNET
  • INJECTION MOULDED POLYPROPYLENE CONE
  • NBR NITRILE RUBBER SURROUND
  • NOMEX SPIDER
  • KAPTON VOICE-COIL FORMER
  • GOLD PLATED FAST-ON CONNECTORS

TWEETER

  • 25 MM BLACK SILK DOME NEO TWEETER
  • POLYIMIDE VOICE COIL FORMER
  • FERROFLUID COOLED VOICE-COIL
  • MOUNTING ADAPTORS INCLUDED

CROSSOVER

  • 6 DB/OCT IN-LINE CROSSOVER NETWORK
  • SPACE-SAVING CROSSOVER HOUSING
  • 0DB/-3DB TWEETER ATTENUATION
 ATC165
Frequency response60 Hz – 25 kHz
Nominal impedance
4 ohms
Sensitivity 1 W/1 m92 dB
Nominal power handling90 Wrms
Mounting diameter145 mm
Mounting depth59 mm
ATC130 13 cm /5,25

ATC130
13 cm/5,25″ 2-way component speaker system

  • Powerful Strontium-Ferrite magnet motor
  • 25 mm silk-dome tweeter
  • 0/-3dB tweeter attenuation
  • mounting adaptors included
  • grilles included
The ATC series can replace factory mounted components without any problem. There is no need to fit a common crossover as the woofer can be exchanged directly 1 to 1. A compact tweeter cross- over is included that can easily be placed behind the trim.

The newly developed AXTON 25 mm woven tweeter of the compos make long listening sessions a pleasure even at high volumes. With its faithful reproduction the tweeter also scores with moderate instal- lation requirements due to the small housing dimensions. The special diffuser ensures a broad radiation pattern thereby considerably increasing the sound staging. For mounting well away from the original installation position AXTON has designed a sleek enclosure providing for various positioning and alignment angles with the aid of two mounting brackets.

MID/WOOFER

  • 13 CM EURO-DIN BASKET
  • STRONTIUM-FERRITE MAGNET
  • INJECTION MOULDED POLYPROPYLENE CONE
  • NBR NITRILE RUBBER SURROUND
  • NOMEX SPIDER
  • KAPTON VOICE-COIL FORMER
  • GOLD PLATED FAST-ON CONNECTORS

TWEETER

  • 25 MM BLACK SILK DOME NEO TWEETER
  • POLYIMIDE VOICE COIL FORMER
  • FERROFLUID COOLED VOICE-COIL
  • MOUNTING ADAPTORS INCLUDED

CROSSOVER

  • 6 DB/OCT IN-LINE CROSSOVER NETWORK
  • SPACE-SAVING CROSSOVER HOUSING
  • 0DB/-3DB TWEETER ATTENUATION
 ATC130
Frequency response75 Hz – 25 kHz
Nominal impedance
4 ohms
Sensitivity 1 W/1 m91 dB
Nominal power handling70 Wrms
Mounting diameter116 mm
Mounting depth56 mm
ATC100 10 cm /4

ATC100
10 cm/4″ 2-way component speaker system

  • Powerful Strontium-Ferrite magnet motor
  • 25 mm silk-dome tweeter
  • 0/-3dB tweeter attenuation
  • mounting adaptors included
  • grilles included
The ATC series can replace factory mounted components without any problem. There is no need to fit a common crossover as the woofer can be exchanged directly 1 to 1. A compact tweeter cross- over is included that can easily be placed behind the trim.

The newly developed AXTON 25 mm woven tweeter of the compos make long listening sessions a pleasure even at high volumes. With its faithful reproduction the tweeter also scores with moderate instal- lation requirements due to the small housing dimensions. The special diffuser ensures a broad radiation pattern thereby considerably increasing the sound staging. For mounting well away from the original installation position AXTON has designed a sleek enclosure providing for various positioning and alignment angles with the aid of two mounting brackets.

MID/WOOFER

  • 10 CM EURO-DIN BASKET
  • STRONTIUM-FERRITE MAGNET
  • INJECTION MOULDED POLYPROPYLENE CONE
  • NBR NITRILE RUBBER SURROUND
  • NOMEX SPIDER
  • KAPTON VOICE-COIL FORMER
  • GOLD PLATED FAST-ON CONNECTORS

TWEETER

  • 25 MM BLACK SILK DOME NEO TWEETER
  • POLYIMIDE VOICE COIL FORMER
  • FERROFLUID COOLED VOICE-COIL
  • MOUNTING ADAPTORS INCLUDED

CROSSOVER

  • 6 DB/OCT IN-LINE CROSSOVER NETWORK
  • SPACE-SAVING CROSSOVER HOUSING
  • 0DB/-3DB TWEETER ATTENUATION
 ATC100
Frequenzgang85 Hz – 25 kHz
Nominale Impedanz
4 Ohm
Empfindlichkeit 1 W/1 m90 dB
Nennbelastbarkeit60 Wrms
Einbaudurchmesser93 mm
Einbautiefe 42 mm
ATC26 16.5 cm/6.5

ATC26
16.5 cm/6.5″
Component Speaker System

  • Compact crossover equipped with MKT film capacitors
  • Hard gold plated connectors guarantee trouble-free long-life operation without the sound suffering from signal losses
With the ATC series, AXTON introduces speaker systems that allow to retrofit and upgrade any vehicle in truly uncomplicated manner, for a transparent sound – even in combination with the original factory radio.
Ease of installation thanks, musicality and precision coupled with durability and high efficiency – these are attributes for which AXTON speaker are known for decades, where the new systems cause no exception of the rule.
The ATC systems have ferrite magnets of moderate dimensions to provide for a rich, powerful bass reproduction but still comply with mounting depth requirements of most vehicles. Both speaker models deploy steel baskets painted in anthracite grey, PP cones with high damping and NBR nitrile surrounds for a long service life. Nomex spiders and 25 mm voice coils, wound on polyimide formers, ensure high mechanical and electrical resilience and power handling.
The sets feature a newly designed 25 mm soft dome tweeter that excels with a linear frequency response way beyond 20 kHz and a very low distortion level even at high SPL due to the use of a strong neodymium magnet. Aside of the transparent sound, this tweeter also comes with shallow housing design for a simplified mounting.
The crossovers are constructed with attention to detail: Equipped with MKT film capacitors, three different tweeter attenuations levels can be set (+3/0/-3 dB).
Gold plated terminals ensure trouble-free long-term operation without signal loss and underline the high quality of the AXTON component systems.
  • woofer with steel basket in Euro-DIN format
  • strontium ferrite magnet
  • resonance optimized polypropylene cone
  • surround made of nitrile rubber (NBR)
  • 25 mm voice coil wound with copper wire
  • tweeter with 25 mm soft dome, ferrofluid cooled with neodymium magnet and mounting adaptors for recessed and surface mounting
  • compact crossover equipped with MKT film capacitors and three tweeter level attenuation options (+3/0/-3 dB)
  • gold plated terminals
 ATC26
Peak Input Power160 W
Continuous Input Power (RMS)
120 W
Sensitivity (1 W/1 m)91 dB
Frequency Response (-3 dB)60 Hz – 25 kHz
Nominal Impedance 4 ohms
Cutout Diameter 144 mm
Mounting Depth 66 mm
ATC25 13 cm /5.25

ATC25
13 cm/5.25″
Component Speaker System

  • Compact crossover equipped with MKT film capacitors
  • Hard gold plated connectors guarantee trouble-free long-life operation without the sound suffering from signal losses
With the ATC series, AXTON introduces speaker systems that allow to retrofit and upgrade any vehicle in truly uncomplicated manner, for a transparent sound – even in combination with the original factory radio.
Ease of installation thanks, musicality and precision coupled with durability and high efficiency – these are attributes for which AXTON speaker are known for decades, where the new systems cause no exception of the rule.
The ATC systems have ferrite magnets of moderate dimensions to provide for a rich, powerful bass reproduction but still comply with mounting depth requirements of most vehicles. Both speaker models deploy steel baskets painted in anthracite grey, PP cones with high damping and NBR nitrile surrounds for a long service life. Nomex spiders and 25 mm voice coils, wound on polyimide formers, ensure high mechanical and electrical resilience and power handling.
The sets feature a newly designed 25 mm soft dome tweeter that excels with a linear frequency response way beyond 20 kHz and a very low distortion level even at high SPL due to the use of a strong neodymium magnet. Aside of the transparent sound, this tweeter also comes with shallow housing design for a simplified mounting.
The crossovers are constructed with attention to detail: Equipped with MKT film capacitors, three different tweeter attenuations levels can be set (+3/0/-3 dB).
Gold plated terminals ensure trouble-free long-term operation without signal loss and underline the high quality of the AXTON component systems.
  • woofer with steel basket in Euro-DIN format
  • strontium ferrite magnet
  • resonance optimized polypropylene cone
  • surround made of nitrile rubber (NBR)
  • 25 mm voice coil wound with copper wire
  • tweeter with 25 mm soft dome, ferrofluid cooled with neodymium magnet and mounting adaptors for recessed and surface mounting
  • compact crossover equipped with MKT film capacitors and three tweeter level attenuation options (+3/0/-3 dB)
  • gold plated terminals
 ATC25
Peak Input Power140 W
Continuous Input Power (RMS)
100 W
Sensitivity (1 W/1 m)90 dB
Frequency Response (-3 dB)70 Hz – 25 kHz
Nominal Impedance4 ohms
Cutout Diameter118 mm
Mounting Depth62 mm
ATC26N 16.5 cm/6.5

ATC26N
16.5 cm/6.5″
Shallow Component System

  • Compact crossover equipped with MKT film capacitors
  • Hard gold plated connectors guarantee trouble-free long-life operation without the sound suffering from signal losses
With the ATC-N series, AXTON introduces speaker systems that allow to retrofit and upgrade any vehicle in truly uncomplicated manner, for a transparent sound – even in combination with the original factory radio.
Ease of installation thanks, musicality and precision coupled with durability and high efficiency – these are attributes for which AXTON speaker are known for decades, where the new systems cause no exception of the rule.
Especially for cars with mounting depth limitations in the front doors, the ATC25N (13 cm) and ATC26N (16.5 cm) have been developed. Both models use compact yet very powerful neodymium magnets and deploy steel baskets painted in anthracite grey, PP cones with high damping and NBR nitrile surrounds for a long service life. Nomex spiders and 25 mm voice coils, wound on polyimide formers, ensure high mechanical and electrical resilience and power handling.
The sets feature a newly designed 25 mm soft dome tweeter that excels with a linear frequency response way beyond 20 kHz and a very low distortion level even at high SPL due to the use of a strong neodymium magnet. Aside of the transparent sound, this tweeter also comes with shallow housing design for a simplified mounting.
The crossovers are constructed with attention to detail: Equipped with MKT film capacitors, three different tweeter attenuations levels can be set (+3/0/-3 dB).
Gold plated terminals ensure trouble-free long-term operation without signal loss and underline the high quality of the AXTON component systems.
  • woofer with steel basket in Euro-DIN format
  • neodymium magnet
  • resonance optimized polypropylene cone
  • surround made of nitrile rubber (NBR)
  • 25 mm voice coil wound with copper wire
  • tweeter with 25 mm soft dome, ferrofluid cooled with neodymium magnet and mounting adaptors for recessed and surface mounting
  • compact crossover equipped with MKT film capacitors and three tweeter level attenuation options (+3/0/-3 dB)
  • gold plated terminals
 ATC26N
Peak Input Power140 W
Continuous Input Power (RMS)
100 W
Sensitivity (1 W/1 m)89 dB
Frequency Response (-3 dB)60 Hz – 25 kHz
Nominal Impedance4 ohms
Cutout Diameter144 mm
Mounting Depth 50 mm
ATC25N 13 cm/5.25

ATC25N
13 cm/5.25″
Shallow Component System

  • Compact crossover equipped with MKT film capacitors
  • Hard gold plated connectors guarantee trouble-free long-life operation without the sound suffering from signal losses
With the ATC-N series, AXTON introduces speaker systems that allow to retrofit and upgrade any vehicle in truly uncomplicated manner, for a transparent sound – even in combination with the original factory radio.
Ease of installation thanks, musicality and precision coupled with durability and high efficiency – these are attributes for which AXTON speaker are known for decades, where the new systems cause no exception of the rule.
Especially for cars with mounting depth limitations in the front doors, the ATC25N (13 cm) and ATC26N (16.5 cm) have been developed. Both models use compact yet very powerful neodymium magnets and deploy steel baskets painted in anthracite grey, PP cones with high damping and NBR nitrile surrounds for a long service life. Nomex spiders and 25 mm voice coils, wound on polyimide formers, ensure high mechanical and electrical resilience and power handling.
The sets feature a newly designed 25 mm soft dome tweeter that excels with a linear frequency response way beyond 20 kHz and a very low distortion level even at high SPL due to the use of a strong neodymium magnet. Aside of the transparent sound, this tweeter also comes with shallow housing design for a simplified mounting.
The crossovers are constructed with attention to detail: Equipped with MKT film capacitors, three different tweeter attenuations levels can be set (+3/0/-3 dB).
Gold plated terminals ensure trouble-free long-term operation without signal loss and underline the high quality of the AXTON component systems.
  • woofer with steel basket in Euro-DIN format
  • neodymium magnet
  • resonance optimized polypropylene cone
  • surround made of nitrile rubber (NBR)
  • 25 mm voice coil wound with copper wire
  • tweeter with 25 mm soft dome, ferrofluid cooled with neodymium magnet and mounting adaptors for recessed and surface mounting
  • compact crossover equipped with MKT film capacitors and three tweeter level attenuation options (+3/0/-3 dB)
  • gold plated terminals
 ATC25N
Peak Input Power120 W
Continuous Input Power (RMS)
80 W
Sensitivity (1 W/1 m)88 dB
Frequency Response (-3 dB)70 Hz – 25 kHz
Nominal Impedance4 ohms
Cutout Diameter118 mm
Mounting Depth46 mm
ATC26-DUC Vehicle-specific Compo for FIAT Ducato

ATC26-DUC
Vehicle-specific Compo
for FIAT Ducato

  • 12 dB/oct. crossover mounted on the terminal of the basket
  • Mounting ring
Sound system upgrade made easy: With AXTON‘s ATC26-DUC, whose sound performance and installation features have been specifically ­developed for motorhomes based on the FIAT Ducato. Just plug and play!
The installation of the mid/woofer is radically simplified by the 12 dB/oct. crossover mounted on the terminal of the basket, and a mounting ring fitted directly to the basket. The flat tweeter has an inline crossover that is simple to install, and can therefore easily be mounted in the different A-pillar trims of the FIAT Ducato. Also tailored for fitting in the Ducato are the connectors of the mid/woofer and tweeter, thereby providing a direct connection to the connector present in the vehicle.
  • Mid/woofer with strontium ferrite magnet, resonance
  • optmized PP cone, surround made of nitrile rubber (NBR),
  • spider made of Nomex
  • Tweeter with 25 mm soft dome, ferrofluid cooled with neodymium magnet
  • Compact 12 dB/oct. tweeter inline crossover, 12 dB/oct. mid/woofer crossover, mounted on terminal of basket
  • Car specific plug’N’play connector design
 ATC26-DUC
Peak Input Power160 W
Continuous Input Power (RMS)120 W
Sensitivity (1 W/1 m)91 dB
Frequency Response (-3 dB) 60 Hz – 25 kHz
Nominal Impedance4 ohms
Cutout Diameter ---
Mounting Depth ---
ModelTypeModel Year
FIAT Ducato III250/251
2006 > 2011
FIAT Ducato III EURO 5
250/2512011 >
Citroën Jumper II250/250D/250L2006 >
Peugeot Boxer II250/2512006 >