Compact Power Amps

This amp series is a perfect example of AXTON‘s great experience in the construction of power amplifiers. AXTON‘s high standards for the development of amplifier series were as demanding in the past, as they are today: affordability, practicality and quality combined with a maximum of musicality.

Compact Power Amps
A500 5-Channel Amplifier

A500 5-Channel Amplifier

  • The ultimate system amplifier
  • Ultra-compact Class-D amplifiers
  • Cast terminals that can also take large large cross-section cables
This amp series is a perfect example of AXTON‘s great experience in the construction of power amplifiers. AXTON‘s high standards for the development of amplifier series were as demanding in the past, as they are today: affordability, practicality and quality combined with a maximum of musicality. Amplifier technology has made great progress in the recent years and therefore, the new AXTON Class-D amplifiers do perform on a much higher level for their sound quality, and their technical level of perfection.
Inside the significantly reduced housing dimensions – at 10.5 cm width and 4 cm height – the sophisticated amplifier circuit ensures for a great sound with amazing performance: these amps reproduce each piece of music with transparency, thrilling dynamics and, above all, a truly joyful reproduction of music.
The design of the board layouts is optimized for lowest distortion, encapsulated components ensure high resilience to interference. The A500 is of course equipped with active crossovers, high-level inputs with auto-turn-on and a bass level remote control.
  • Ultra-compact Class-D amplifiers
  • Aluminum heat sink for optimal heat dissipation
  • Fully suitable for vehicles with automatic start / stop
  • High-level / low-level input
  • Auto turn-on via DC offset or music signal
  • Integrated electronic crossover:
    12 dB/oct. low-pass fi lter (subwoofer, 50 – 300 Hz), 12 dB/oct. high-pass fi lter (satellite, 50 Hz)
  • Bass boost control @ 45 Hz at (0 – 12 dB)
  • Bass level remote control
 A500
Ausgangsleistung @ 4 Ohm4 x 80 + 1 x 180 W
Ausgangsleistung @ 2 Ohm4 x 150 + 1 x 350 W
Ausgangsleistung @ 4 Ohm gebrückt2 x 300 + 1 x 180 W
Frequenzgang10 Hz – 21 kHz
Signal-Rauschabstand>86 dB
Variable Eingangsempfindlichkeit0.5 – 12 V
Abmessungen (B x H x T)270 x 40 x 105 mm
A400 4-Channel Amplifier

A400 4-Channel Amplifier

  • Perfect for the use with an AXTON active subwoofer
  • Ultra-compact Class-D amplifiers
  • Cast terminals that can also take large large cross-section cables
This amp series is a perfect example of AXTON‘s great experience in the construction of power amplifiers. AXTON‘s high standards for the development of amplifier series were as demanding in the past, as they are today: affordability, practicality and quality combined with a maximum of musicality. Amplifier technology has made great progress in the recent years and therefore, the new AXTON Class-D amplifiers do perform on a much higher level for their sound quality, and their technical level of perfection.
Inside the significantly reduced housing dimensions – at 10.5 cm width and 4 cm height – the sophisticated amplifier circuit ensures for a great sound with amazing performance: these amps reproduce each piece of music with transparency, thrilling dynamics and, above all, a truly joyful reproduction of music.
The design of the board layouts is optimized for lowest distortion, encapsulated components ensure high resilience to interference. The A400 is of course equipped with an active crossover as well high-level inputs with auto-turn-on.
  • Ultra-compact Class-D amplifiers
  • Aluminum heat sink for optimal heat dissipation
  • Fully suitable for vehicles with automatic start / stop
  • High-level / low-level input
  • Auto turn-on via DC offset or music signal
  • Integrated electronic crossover:
    12 dB/oct. high-pass and low-pass fi lters (50 – 500 Hz)
 A400
Ausgangsleistung @ 4 Ohm4 x 100 W
Ausgangsleistung @ 2 Ohm4 x 170 W
Ausgangsleistung @ 4 Ohm gebrückt2 x 320 W
Frequenzgang10 Hz – 21 kHz
Signal-Rauschabstand>86 dB
Variable Eingangsempfindlichkeit0.47 – 12.4 V
Abmessungen (B x H x T)230 x 40 x 105 mm
A200 2-Channel Amplifier

A200 2-Channel Amplifier

  • Much power for satellites or subwoofers
  • Ultra-compact Class-D amplifiers
  • Cast terminals that can also take large large cross-section cables
This amp series is a perfect example of AXTON‘s great experience in the construction of power amplifiers. AXTON‘s high standards for the development of amplifi er series were as demanding in the past, as they are today: affordability, practicality and quality combined with a maximum of musicality. Amplifier technology has made great progress in the recent years and therefore, the new AXTON Class-D amplifiers do perform on a much higher level for their sound quality, and their technical level of perfection.
Inside the significantly reduced housing dimensions – at 10.5 cm width and 4 cm height – the sophisticated amplifier circuit ensures for a great sound with amazing performance: these amps reproduce each piece of music with transparency, thrilling dynamics and, above all, a truly joyful reproduction of music.
The design of the board layouts is optimized for lowest distortion, encapsulated components ensure high resilience to interference. The A200 is of course equipped with an active crossover as well high-level inputs with auto-turn-on.
  • Ultra-compact Class-D amplifiers
  • Aluminum heat sink for optimal heat dissipation
  • Fully suitable for vehicles with automatic start / stop
  • High-level / low-level input
  • Auto turn-on via DC offset or music signal
  • Integrated electronic crossover:
    12 dB/oct. high-pass and low-pass fi lters (50 – 500 Hz)
 A200
Ausgangsleistung @ 4 Ohm2 x 160 W
Ausgangsleistung @ 2 Ohm2 x 260 W
Ausgangsleistung @ 4 Ohm gebrückt1 x 500 W
Frequenzgang10 Hz – 21 kHz
Signal-Rauschabstand>86 dB
Variable Eingangsempfindlichkeit0.45 – 11 V
Abmessungen (B x H x T)200 x 40 x 105 mm
A100 Mono Amplifier

A100 Mono Amplifier

  • Ultimate performance for all AXTON subwoofers
  • Ultra-compact Class-D amplifiers
  • Cast terminals that can also take large large cross-section cables
This amp series is a perfect example of AXTON‘s great experience in the construction of power amplifiers. AXTON‘s high standards for the development of amplifi er series were as demanding in the past, as they are today: affordability, practicality and quality combined with a maximum of musicality. Amplifier technology has made great progress in the recent years and therefore, the new AXTON Class-D amplifiers do perform on a much higher level for their sound quality, and their technical level of perfection.
Inside the significantly reduced housing dimensions – at 10.5 cm width and 4 cm height – the sophisticated amplifier circuit ensures for a great sound with amazing performance: these amps reproduce each piece of music with transparency, thrilling dynamics and, above all, a truly joyful reproduction of music.
The design of the board layouts is optimized for lowest distortion, encapsulated components ensure high resilience to interference. The A100 is of course equipped with active crossovers, high-level inputs with auto-turn-on and a bass level remote control.
  • Ultra-compact Class-D amplifiers
  • Aluminum heat sink for optimal heat dissipation
  • Fully suitable for vehicles with automatic start / stop
  • High-level / low-level input
  • Auto turn-on via DC offset or music signal
  • Integrated electronic crossover:
    12 dB/oct. low-pass fi lter (50 – 250 Hz), 12 dB/oct. subsonic fi ter (10 – 55 Hz)
  • Bass boost control @ 45 Hz at (0 – 18 dB)
  • Bass level remote control
 A100
Ausgangsleistung @ 4 Ohm1 x 200 W
Ausgangsleistung @ 2 Ohm1 x 350 W
Frequenzgang10 Hz – 250 Hz
Signal-Rauschabstand>95 dB
Variable Eingangsempfindlichkeit0.25 – 6 V
Abmessungen (B x H x T)190 x 40 x 105 mm