Power Amps A-Series

With the new line up, AXTON has five compact amplifiers in its product range that ­flexibly integrate into your car and inspire with emotional livesound.
A lot has been invested in the internals, the features and design of this amplifier generation. Massive heat sinks of anodized extruded aluminum guarantee optimal cooling and a stable operating temperature. Equipped with SMT boards, the housings are so compact that they fit into any vehicle.

Amplifiers A-Series
A480 4-Channel Amplifier

A480 4-Channel Amplifier

  • Modern design with blue backlit AXTON logo
  • Cast terminals that can also take large large cross-section cables
Retroffiting power sound in your vehicle made easy: With the new line up, AXTON has five compact amplifiers in its product range that ­flexibly integrate into your car and inspire with emotional livesound.
A lot has been invested in the internals, the features and design of this amplifier generation. Massive heat sinks of anodized extruded aluminum guarantee optimal cooling and a stable operating temperature. Equipped with SMT boards, the housings are so compact that they fit into any vehicle.
The quality of these class A/B amps is also evident in the technically proven internal design realized with SMDs: First class components guarantee a long life and maximum reliability, even under extreme loads.
With switching that uses bipolar transistors, the AXTONs make no compromises on sound: High efficiency and high power performance, coupled with a punchy bass dynamic range and first class sound-staging, ensure music listening pleasure every day.
Variable high- and low-pass filters, fast acting protection circuitry, and power terminals capable of taking large cross-section cables round off the features of these power packages.
  • Modern design with blue backlit AXTON logo
  • Compact heat sink made of anodized aluminum extrusion profile in titanium color
  • MOSFET power supply, BJT power amplifier and space saving SMT preamp- and electronic crossover layouts
  • Built-in electronic crossovers: variable 12 dB/oct. high- and lowpass (30 – 250 Hz)
  • High level input
  • Variable input sensitivity from 0.2 to 7.5 V
  • All 2- and 4-channel models drive 2 ohms load and can be mono bridged into 4 ohms
  • Protection circuit against short circuit, overheating and DC voltage on the speaker outputs
  • High-quality die-cast terminals for power input and speaker outputs
 A480
Rated power output @ 4 Ω (< 0.5% THD / 13.8 V) 4 x 85 W RMS
Rated power output @ 2 Ω (< 0.5% THD / 13.8 V) 4 x 180 W RMS
Signal noise ratio>90 dB/A
Channel separation @ 1 kHz >44 dB
Damping factor @ 4 Ω >200
Dimensions (W x H x D)136 x 55 x 310 mm
A460 4-Channel Amplifier

A460 4-Channel Amplifier

  • Modern design with blue backlit AXTON logo
  • Cast terminals that can also take large large cross-section cables
Retroffiting power sound in your vehicle made easy: With the new line up, AXTON has five compact amplifiers in its product range that ­flexibly integrate into your car and inspire with emotional livesound.
A lot has been invested in the internals, the features and design of this amplifier generation. Massive heat sinks of anodized extruded aluminum guarantee optimal cooling and a stable operating temperature. Equipped with SMT boards, the housings are so compact that they fit into any vehicle.
The quality of these class A/B amps is also evident in the technically proven internal design realized with SMDs: First class components guarantee a long life and maximum reliability, even under extreme loads.
With switching that uses bipolar transistors, the AXTONs make no compromises on sound: High efficiency and high power performance, coupled with a punchy bass dynamic range and first class sound-staging, ensure music listening pleasure every day.
Variable high- and low-pass filters, fast acting protection circuitry, and power terminals capable of taking large cross-section cables round off the features of these power packages.
  • Modern design with blue backlit AXTON logo
  • Compact heat sink made of anodized aluminum extrusion profile in titanium color
  • MOSFET power supply, BJT power amplifier and space saving SMT preamp- and electronic crossover layouts
  • Built-in electronic crossovers: variable 12 dB/oct. high- and lowpass (30 – 250 Hz)
  • High level input
  • Variable input sensitivity from 0.2 to 7.5 V
  • All 2- and 4-channel models drive 2 ohms load and can be mono bridged into 4 ohms
  • Protection circuit against short circuit, overheating and DC voltage on the speaker outputs
  • High-quality die-cast terminals for power input and speaker outputs
 A460
Rated power output @ 4 Ω (< 0.5% THD / 13.8 V) 4 x 60 RMS
Rated power output @ 2 Ω (< 0.5% THD / 13.8 V) 4 x 80 W RMS
Signal noise ratio>90 dB/A
Channel separation @ 1 kHz >47 dB
Damping factor @ 4 Ω >200
Dimensions (W x H x D)136 x 55 x 250 mm
A295 2-Channel Amplifier

A295 2-Channel Amplifier

  • Modern design with blue backlit AXTON logo
  • Cast terminals that can also take large large cross-section cables
Retroffiting power sound in your vehicle made easy: With the new line up, AXTON has five compact amplifiers in its product range that ­flexibly integrate into your car and inspire with emotional livesound.
A lot has been invested in the internals, the features and design of this amplifier generation. Massive heat sinks of anodized extruded aluminum guarantee optimal cooling and a stable operating temperature. Equipped with SMT boards, the housings are so compact that they fit into any vehicle.
The quality of these class A/B amps is also evident in the technically proven internal design realized with SMDs: First class components guarantee a long life and maximum reliability, even under extreme loads.
With switching that uses bipolar transistors, the AXTONs make no compromises on sound: High efficiency and high power performance, coupled with a punchy bass dynamic range and first class sound-staging, ensure music listening pleasure every day.
Variable high- and low-pass filters, fast acting protection circuitry, and power terminals capable of taking large cross-section cables round off the features of these power packages.
  • Modern design with blue backlit AXTON logo
  • Compact heat sink made of anodized aluminum extrusion profile in titanium color
  • MOSFET power supply, BJT power amplifier and space saving SMT preamp- and electronic crossover layouts
  • Built-in electronic crossovers: variable 12 dB/oct. high- and lowpass (30 – 250 Hz)
  • High level input
  • Variable input sensitivity from 0.2 to 7.5 V
  • All 2- and 4-channel models drive 2 ohms load and can be mono bridged into 4 ohms
  • Protection circuit against short circuit, overheating and DC voltage on the speaker outputs
  • High-quality die-cast terminals for power input and speaker outputs
 A295
Rated power output @ 4 Ω (< 0.5% THD / 13.8 V) 2 x 105 RMS
Rated power output @ 2 Ω (< 0.5% THD / 13.8 V) 2 x 155 W RMS
Signal noise ratio>100 dB/A
Channel separation @ 1 kHz >55 dB
Damping factor @ 4 Ω >150
Dimensions (W x H x D)136 x 55 x 250 mm
A250 2-Channel Amplifier

A250 2-Channel Amplifier

  • Modern design with blue backlit AXTON logo
  • Cast terminals that can also take large large cross-section cables
Retroffiting power sound in your vehicle made easy: With the new line up, AXTON has five compact amplifiers in its product range that ­flexibly integrate into your car and inspire with emotional livesound.
A lot has been invested in the internals, the features and design of this amplifier generation. Massive heat sinks of anodized extruded aluminum guarantee optimal cooling and a stable operating temperature. Equipped with SMT boards, the housings are so compact that they fit into any vehicle.
The quality of these class A/B amps is also evident in the technically proven internal design realized with SMDs: First class components guarantee a long life and maximum reliability, even under extreme loads.
With switching that uses bipolar transistors, the AXTONs make no compromises on sound: High efficiency and high power performance, coupled with a punchy bass dynamic range and first class sound-staging, ensure music listening pleasure every day.
Variable high- and low-pass filters, fast acting protection circuitry, and power terminals capable of taking large cross-section cables round off the features of these power packages. Added to that, high-level inputs with auto turn-on enable the amplifiers to be easily connected to factory installed radios.
  • Modern design with blue backlit AXTON logo
  • Compact heat sink made of anodized aluminum extrusion profile in titanium color
  • MOSFET power supply, BJT power amplifier and space saving SMT preamp- and electronic crossover layouts
  • Built-in electronic crossovers: variable 12 dB/oct. high- and lowpass (30 – 250 Hz)
  • High level input with auto turn-on for all models
  • Variable input sensitivity from 0.2 to 7.5 V
  • All 2- and 4-channel models drive 2 ohms load and can be mono bridged into 4 ohms
  • Protection circuit against short circuit, overheating and DC voltage on the speaker outputs
  • High-quality die-cast terminals for power input and speaker outputs
 A250
Rated power output @ 4 Ω (< 0.5% THD / 13.8 V) 2 x 57 RMS
Rated power output @ 2 Ω (< 0.5% THD / 13.8 V) 2 x 85 W RMS
Signal noise ratio>90 dB/A
Channel separation @ 1 kHz >55 dB
Damping factor @ 4 Ω >150
Dimensions (W x H x D)136 x 55 x 190 mm
A1300 Mono Amplifier

A1300 Mono Amplifier

  • Modern design with blue backlit AXTON logo
  • Cast terminals that can also take large large cross-section cables
Retroffiting power sound in your vehicle made easy: With the new line up, AXTON has five compact amplifiers in its product range that ­flexibly integrate into your car and inspire with emotional livesound.
A lot has been invested in the internals, the features and design of this amplifier generation. Massive heat sinks of anodized extruded aluminum guarantee optimal cooling and a stable operating temperature. Equipped with SMT boards, the housings are so compact that they fit into any vehicle.
The quality of these class A/B amps is also evident in the technically proven internal design realized with SMDs: First class components guarantee a long life and maximum reliability, even under extreme loads.
With switching that uses bipolar transistors, the AXTONs make no compromises on sound: High efficiency and high power performance, coupled with a punchy bass dynamic range and first class sound-staging, ensure music listening pleasure every day.
Variable high- and low-pass filters, fast acting protection circuitry, and power terminals capable of taking large cross-section cables round off the features of these power packages.
  • Modern design with blue backlit AXTON logo
  • Compact heat sink made of anodized aluminum extrusion profile in titanium color
  • MOSFET power supply, BJT power amplifier and space saving SMT preamp- and electronic crossover layouts
  • Built-in electronic crossovers: variable 12 dB/oct. high- and lowpass (30 – 250 Hz)
  • Adjustable subsonic filter (15 – 50 Hz), low-pass filter (50 – 250 Hz) and switchable 6 dB bass boost
  • High level input
  • Variable input sensitivity from 0.2 to 7.5 V
  • Protection circuit against short circuit, overheating and DC voltage on the speaker outputs
  • High-quality die-cast terminals for power input and speaker outputs
  • Includes bass level remote control
 A430DSP
Music Power Output:
54 W x 4
RMS Power Output:26 W x 4
Frequency response:20 Hz ~ 20 KHz
Audio sampling frequency:48 KHz
Distortion:1 KHz < 0.001%
Supply voltage range:9 V – 15 V
Signal to noise ratio:> 95 dB
Dynamic range:> 95 dB
Standby current:< 0.1 mA
Class-D amp efficiency: 95%+
Maximum operating current:15 A
Dimensions (L x W x H):98 x 64 x 25 mm